Filter
Top Products
2
ENGLISH
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to
ensure your complete understanding and to obtain the best possible performance from the unit.
BEFORE USE
*
For safety....
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
*
Temperature inside the car....
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
How to Reset your unit........................... 2
LOCATION OF THE BUTTONS .......... 3
Control Panel ......................................... 3
BASIC OPERATIONS ..................... 4
Turning on the power ............................. 4
RADIO BASIC OPERATIONS ............ 5
Listening to the radio.............................. 5
Storing stations in memory .................... 6
FM station automatic preset: SSM ......... 6
Manual preset ........................................ 6
Tuning into a preset station .................... 7
Other convenient tuner functions ........... 7
Scanning broadcast stations.................. 7
Selecting FM reception sound ............... 7
TAPE OPERATIONS ...................... 8
Listening to a cassette ........................... 8
Finding the beginning of a tune.............. 8
Other convenient tape functions ............ 9
Prohibiting tape ejection......................... 9
Skipping the blank portions on the tape. 9
Repeat Function..................................... 9
SOUND ADJUSTMENTS ............... 10
Turning on/off the loudness function .... 10
Adjusting the sound ............................. 10
Using the Sound Control Memory........ 11
Selecting and Storing the sound
modes ............................................... 11
Recalling the sound modes.................. 11
Canceling Advanced SCM ................... 11
Storing your own sound adjustments... 12
OTHER MAIN FUNCTIONS ............ 13
Setting the clock................................... 13
Selecting the level display.................... 14
Detaching the control panel ................. 15
REMOTE OPERATIONS ................ 16
Installing the battery............................. 16
Using the remote controller.................. 17
CD CHANGER OPERATIONS .......... 18
Playing CDs ......................................... 18
Selecting CD playback modes ............. 19
EXTERNAL COMPONENT OPERATIONS ..
20
Selecting the external component to use...
21
MAINTENANCE ......................... 22
TROUBLESHOOTING .................. 23
SPECIFICATIONS....................... 24
CONTENTS
SEL (Select)
How to Reset your unit
Press and hold both the SEL (Select) and (Standby/On/Attenuator) buttons at the same
time for several seconds.
This will reset the built-in microcomputer.
NOTE: Your preset adjustments — such as preset channels or sound adjustments will also
be erased.
(Standby/On/Attenuator)
Scan
Music
Multi
MO
DISP
DISP
SCAN
SCAN
LOUD
LOUD
891011 127
CD CHANGER CONTROL
CD CHANGER CONTROL
EN02-03KS-FX611[U]-9 11/1/01, 3:16 PM2