Filter
Top Products
23
ENGLISH
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
• See “Using the sound control memory
(SCM)” on page 22 for details.
2
Select “BAS (Bass)” or “TRE
(Treble)”.
SCM
Ex.: When you select “SOFT.”
Ex.: When you adjust “TRE (treble).”
3
Adjust the bass or treble level.
• See page 21 for details.
Equalization pattern changes as you adjust the bass
or treble.
4
To turn on or off the loudness
function.
• See page 21 for details.
5
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
6
Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 22.
SCM
Your adjustment made for the selected
sound mode is stored in memory.
LOUD
LOUD
EN21-23.KD-S845[U]f 1/28/03, 11:57 AM23