Filter
Top Products
7
ENGLISH
4
Adjust the sound as you want.
(See pages 21 – 23.)
To drop the volume in a moment
Press briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial clockwise, you can
also restore the sound.
To turn off the power
Press and hold for more than one second.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 24.
CAUTION on Volume Setting:
Discs produce very little noise compared with
other sources. If the volume level is adjusted for
the tuner, for example, the speakers may be
damaged by the sudden increase in the output
level. Therefore, lower the volume before playing a
disc and adjust it as required during playback.
BASIC OPERATIONS
Turning on the power
1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To operate the tuner (FM or AM),
see pages 8 – 11.
To play a CD,
see pages 12 – 14.
To play an MP3 disc,
see pages 17 – 20.
3
Adjust the volume.
TUNER
SCM
RND
RPT
12
11
10
9
8
7
B
A
N
D
1
3
2
To increase the volume.
To decrease the volume.
Tuner
(FM1 – 3, AM)
CD
TUNER
Volume or audio level indicator (See page 25.)
Volume level appears.
About mistracking:
Mistracking may result from driving on extremely
rough roads. This does not damage the unit and
the disc, but will be annoying.
We recommend that you stop disc playback while
driving on such rough roads.
EN07-07.KD-S845[U]f 2/13/03, 5:00 PM7