Filter
Top Products
30
ENGLISH
This section is ONLY FOR KD-SX750.
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the following procedure, select the external input
correctly. (See “Selecting the external component to use” on page 31.)
1
Select the external component.
• If “LINE IN” does not appear on the display, see page 31
and select the external input (“LINE IN”).
2
Turn on the connected device and start playing the source.
3
Adjust the volume.
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
EXTERNAL COMPONENT OPERATIONS
1
3
External component operations
EN 30-32.KD-SX850[J] 00.1.19, 9:33 AM30