JVC KD-SX750 Car Stereo System User Manual


 
31
ENGLISH
Selecting the external component to use
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
To use the external component as the playback source through this receiver, you need to
select which device — CD changer or external component — to use. When shipped from the
factory, CD changer is selected as the external component.
LINE IN: To use the external component other than CD changer
CHANGER: To use the CD changer
1
Change the source to FM, AM or CD.
2
Press and hold SEL for more than 2 seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,” “LEVEL,” “AREA” or
“LINE IN” appears on the display.
3
Select “LINE IN” if not shown on the display.
4
Select the desired mode — “LINE IN” or
“CHANGER”.
5
Finish the setting.
Note:
For connecting the Line Input Adaptor KS-U57 and the external component, refer to the
Installation/Connection Manual (separate volume).
SSM
FM/AM
1
3
4
2, 5
EN 30-32.KD-SX850[J] 00.1.19, 9:33 AM31