Filter
Top Products
ENGLISH
EXTERNAL DEVICES
19
Listening to the Satellite Radio
Activate your SIRIUS subscription after
connection
1
SIRIUS Satellite Radio starts updating all the SIRIUS
channels.
Once completed, SIRIUS Satellite Radio tunes in to
the preset channel, CH184.
2 Check your SIRIUS ID (see page 28).
3 Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can call
SIRIUS toll-free at 1-888-539-SIRIUS (7474).
“SUB UPDT PRESS ANY KEY” scrolls on the display
once subscription has been completed.
Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available before
activation.
1
XM Tuner* starts updating all the XM channels.
“Channel 1” is tuned in automatically.
2 Check your XM Satellite Radio ID labelled
on the casing of the XM Tuner, or tune in to
“Channel 0” (see page 20).
3 Contact XM Satellite Radio on the internet
at <http://xmradio.com/activation/> to
activate your subscription, or you can call
1-800-XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).
* XM Tuner: XMDirect ™ Tuner Box or XMDirect2 Tuner
System
Before operating, connect either one of the following (not supplied) to the expansion port on the rear of this unit.
• JVC SIRIUS Satellite Radio System, SC-C1 and KS-SRA100, PnP, SC-VDOC1 and KS-SRA100, for listening to the
SIRIUS Satellite Radio.
• XM Satellite Radio System, JVC Smart Digital Adapter–XMDJVC100, CNP2000UC and CNPJVC1 for listening to
the XM Satellite Radio.
GCI (Global Control Information) update
• If channels are updated after subscription, updating starts automatically. “UPDATING” flashes and no sound can be
heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your Satellite Radio.
Continued on the next page
KD-HDR60[J].indb 19KD-HDR60[J].indb 19 09.11.24 11:22:05 AM09.11.24 11:22:05 AM