16
ENGLISH
Using PTY Standby Reception
PTY Standby Reception allows the unit to switch
temporarily to your favourite programme (PTY:
Programme Type) from the current source (another
FM station, CD or other connected components).
• PTY Standby Reception will not work if you are
listening to an AM station.
You can select your favourite programme type for
PTY Standby Reception.
When shipped from the factory, PTY Standby
Reception is turned off. (“Off” is selected for PTY
Standby Reception.)
1
Press and hold SEL
(select) for more than 2
seconds so that one of
the PSM items appears
on the display.
(PSM: see pages 29 and 30.)
2
Press 5 (up) or ∞ (down)
repeatedly until “Tuner”
is selected as the PSM
category (it is shown on
the left side of the
display).
3
Select “PTY Stnby
(standby).”
4
Select one of the
twenty-nine PTY
codes.
(See page 19.)
Selected code name
appears on the display and is
stored into memory.
5
Finish the setting.
7 When the current source is FM, the PTY
indicator either lights up or flashes.
• If the PTY indicator lights up, PTY
Standby Reception is activated.
If a station starts broadcasting the
selected PTY programme, this unit
automatically tunes in to the station.
• If the PTY indicator flashes, PTY
Standby Reception is not yet activated
since the station being received does
not provide the signals used for PTY
Standby Reception.
To activate PTY Standby Reception, you
need to tune in to another station
providing these signals. Press ¢
or 4 to search for such a station.
When a station providing these signals
is tuned in, the PTY indicator stops
flashing and remains lit. Now PTY
Standby Reception is activated.
7 When the current source is other than
FM, the PTY indicator lights up.
If a station starts broadcasting the
selected PTY programme, this unit
automatically changes the source and
tunes in to the station.
To deactivate the PTY Standby Reception,
select “Off” in step 4 by turning the control dial.
The PTY indicator disappears.
PTY indicator
EN14-19LH1000R[E]f.pm5 02.3.14, 3:59 PM16