Filter
Top Products
34
ENGLISH
3
Select “Mode.”
4
Select “User” as the “Mode” (color
mode) setting.
5
Select “User.”
6
Select either “Day” or “Night” as your
user color.
As you turn the control
dial, the user color
alternates between “Day”
and “Night.”
• If you want to select the user color, but do
not need to adjust the color, go to step 9 to
finish the setting.
• If you want to adjust the user color, go to
the next step.
7
Adjust the user color.
1) Press ¢
or 4 to select
one of three primary colors—
“Red” “Green,” and “Blue.”
2) Turn the control dial to adjust the
selected primary color.
You can adjust within the range of 0 to +11.
3) Repeat steps 1) and 2) to adjust
the other primary colors.
8
Repeat steps 6 and 7 to adjust the
other user color—“Day” or “Night”.
9
Finish the setting.
Red Green
Blue
User
(Back to step 5 above)
Mode
(Back to step 3 above)
Note:
To use the color adjusted in this procedure, select
“User” in the step 8 (“Select the display color”) of
“Setting the desired color for each source —Source.”
(See page 33.)
EN28-36LH1000R[E]f.pm5 02.4.11, 2:46 PM34