Filter
Top Products
47
ENGLISH
What appears to be trouble is not always serious. Check the following points before calling a service
center.
TROUBLESHOOTING
Causes
You are driving on rough
roads.
Disc is scratched.
Connections are incorrect.
The volume level is set to the
minimum level.
Connections are incorrect.
Disc is inserted upside down.
CD-R/CD-RW is not finalized.
No disc in the loading slot.
Disc is inserted incorrectly.
Disc is locked.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc.
The control panel is not
attached correctly and firmly.
Signals are too weak.
The antenna is not connected
firmly.
No disc in the magazine.
This unit is not connected to
a CD changer correctly.
Symptoms
• Sound is sometimes
interrupted.
• Sound cannot be heard
from the speakers.
• CD cannot be played back.
• CD-R/CD-RW cannot be
played back.
• Tracks on the CD-R/CD-
RW cannot be skipped.
• “No Disc” flashes on the
display .
• Disc cannot be ejected.
• This unit does not work at
all.
• “Panel Connect Error”
appears on the display.
• SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
• Static noise while listening
to the radio.
• “No Disc” flashes on the
display .
• “Reset 8” flashes on the
display .
• “Reset 1” – “Reset 7”
flashes on the display.
General Playback
Remedies
Stop playback while driving on
rough roads.
Change the disc.
Check the cords and
connections.
Adjust it to the optimum level.
Check the cords and
connections.
Insert the disc correctly.
• Insert a finalized
CD-R/CD-RW.
• Finalize the CD-R/CD-RW
with the component which
you used for recording. (See
page 48.)
Insert a disc into the loading slot.
Insert the disc correctly.
Unlock the disc (See page 22.)
Press the reset button on the
panel holder using a ball-point
pen after detaching the control
panel. (The clock setting and
preset stations stored in memory
are erased.) (See page 2.)
Remove the control panel, wipe
the connectors, then attach it
again. (See page 36.)
Store stations manually.
Connect the antenna firmly.
Insert a disc.
Connect this unit and the CD
changer correctly and press the
reset button of the CD changer.
Press the reset button of the CD
changer.
CD Changer
FM/AM
EN47-49LH1000R[E]f.pm5 02.3.14, 4:09 PM47