Filter
Top Products
45
ENGLISH
What you can do more with DAB
Tracing the same program automatically
(Alternative Reception)
You can keep listening to the same program.
• While receiving a DAB service:
When driving in an area where a service
cannot be received, this unit automatically
tunes in to another ensemble or FM RDS
station, broadcasting the same program.
• While receiving an FM RDS station:
When driving in an area where a DAB service
is broadcasting the same program as the FM
RDS station is broadcasting, this unit
automatically tunes in to the DAB service.
To use Alternative Reception
When shipped from the factory, Alternative
Reception is activated.
• See also “Changing the general settings (PSM)”
on page 28.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2 Press 5 (up) or ∞ (down) repeatedly until “Tuner”
is selected as the PSM category (it is shown on
the left side of the display).
3 Press ¢ or 4 to select “DAB AF”
(alternative frequency).
4 Turn the control dial to select the desired
mode.
• On: Traces the program among DAB
services and FM RDS stations
— Alternative Reception. The AF
indicator lights up on the display
(see page 14).
• Off: Deactivates Alternative Reception.
Note:
When Alternative Reception (for DAB services) is
activated, Network-Tracking Reception (for RDS
stations: see page 14) is also activated
automatically. On the other hand, Network-Tracking
Reception cannot be deactivated without
deactivating Alternative Reception.
5 Press SEL (select) to finish the setting.
Selecting a preset service using the
preset service list
If you forget what services are stored in what
preset number, you can check the preset service
list, then select your desired service on the list.
1
Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
2
Select the DAB band (DAB1, DAB2 or
DAB3) you want.
Each time you press the
button, the DAB band
changes as follows:
3
Press and hold 5 (up) or ∞ (down) until
the preset service list for the current
band (DAB1, DAB2, or DAB3) appears
on the display.
4
If necessary, press 5 (up) or ∞ (down)
until the preset service list you want
(DAB1, DAB2, or DAB3) appears on the
display.
5
Select the number (1 – 6) for the preset
service you want.
DAB1 DAB2 DAB3
FM/AMDAB
EN42-46LH1000R[E]f.pm5 02.3.14, 4:08 PM45