Kenwood DDX371 Car Video System User Manual


 
46
SETTINGS
smeti unem gnitteS
Displaying the <Setup> menu screen
sgnittes >oiduA< eht egnahc tonnac uoY
screen when [STANDBY] is selected on the
<Top Menu>. (page 7)
<Audio> setting screen
<Fader/Balance>
Fader: Adjust the front and rear speaker output
balance.
F6 to R6 (Initial: 0)
When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [
] to adjust.
To clear the adjustment, press [Center].
<Equalizer>
Change the sound mode or adjust and store the
equalization for each source. (Page 40)
larutaN (Initial)/Rock/Pops/Easy/Top40/Jazz/
User
<Loudness>
You can activate/deactivate loudness.
NO (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level. The LOUD indicator lights up.
FFO : Cancels.
> revoX<
Adjust the crossover frequency. (Page 41)
>tesffO emuloV <
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD /VCD, CD,
and DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC.) The
volume level will automatically increase or decrease
when you change the source.
–15 to +6 (Initial: 0 )
>refoowbuS<
ON (Initial): Activates the subwoofer.
OFF: Deactivates the subwoofer.
<Speaker Select>
Select the size of the connected speaker.
Standard (Initial)/Narrow/Middle/Wide