Kenwood DDX5902 Car Video System User Manual


 
ENGLISH 53
SETTINGSSETTINGS
Sound adjustment
R Using the sound equalization
The adjustment is memorized for each source until
you adjust the sound again. If the source is a disc,
the adjustment is stored for each of the following
categories.
DVD/DVD-VR/VCD
CD
DivX/MPEG1/MPEG2/MP3/WMA/AAC
You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1 Display the <Equalizer> screen.
On the <TOP MENU> screen:
2 Select a sound mode
You can change the page to display more
items by pressing [J]/[K].
You can also display the <Equalizer> screen
by pressing AUD (for DDX7015BT )/AUDIO (for
DDX715WBT ) or by pressing and holding the
Volume/ATT/AUDIO knob (for DDX5902 ) on the
monitor panel.
Storing your own adjustment—Adjusting the
sound precisely
1 Select a sound mode. (See the left column.)
2 Select a band and adjust the level of the
selected band.
The number of bands depends on the model.
You can adjust the level by dragging the slider
or using [J]/[K].
Repeat this step to adjust the level of other
bands.
The adjustments are stored and <User> is
activated.
3 Activate ([ON]) or deactivate ([OFF]) the
bass (<Bass EXT>) (1), and then adjust
the subwoofer level (2).
R Setting the car type and speakers
1 Display the <Car Setting> screen.
On the <TOP MENU> screen:
Press [K] repeatedly to change the page on
the <Audio> menu screen.
2 Select a car type (1), and then select the
location of the speakers (2).