Filter
Top Products
ENGLISH 81
RHDMI interface section
Connector Type TYPE-A
RMHL interface section
Supported Version
MHL 2
Maximum Power Supply Current
DC 5 V
900 mA
RBluetooth section
Technology Bluetooth 3.0 + EDR
Frequency 2.402 GHz to 2.480 GHz
Output Power +4 dBm (MAX), 0 dBm (AVE),
Power Class 2
Maximum Communication Range
Line of sight approx. 10 m
(32.8ft)
Audio Codec SBC/AAC/MP3/aptX/aptX Sprint*
Profile HFP (Hands Free Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
GAP (Generic Access Profile)
PBAP (Phonebook Access Profile)
SDP (Service Discovery Profile)
SPP (Serial Port Profile)
* aptX/aptX Sprint are compatible only with DDX5902.
RDSP section
Graphics equalizer
DDX5902:
BAND 7 Band
Frequency (Hz) (BAND1-7)
62.5/160/400/1k/2.5k/6.3k/16k
Gain –9/–8/–7/–6/–5/–4/–3/–2/
–1/0/1/2/3/4/5/6/7/8/9 dB
DDX7015BT/DDX715WBT:
BAND 5 Band
Frequency (Hz) (BAND1-5)
62.5/250/1k/4k/16k
Gain -9/-8/-7/-6/-5/-4/-3/-2/
-1/0/1/2/3/4/5/6/7/8/9 dB
2 Way X'Over
HIGH PASS FILTER frequency
Through/50/60/80/100/120/150/
180/220
SLOPE –6/–12/–18/–24 dB/Oct.
LOW PASS FILTER frequency
50/60/80/100/120/Through
SLOPE –6/–12/–18/–24 dB/Oct.
Position
Front/Rear/Subwoofer Delay
0 ft to 20.0 ft (0.07 ft Step)
Gain –8 dB to 0 dB
Subwoofer Level –50 dB to +10 dB
RFM tuner section
Frequency Range
DDX5902: 87.9 MHz to 107.9 MHz (200 kHz)
DDX7015BT/DDX715WBT:
87.5 MHz to 108.0 MHz (50 kHz)
Usable Sensitivity (S/N: 30 dB)
7.2 dBf (0.63 μV/75 Ω)
Quieting Sensitivity (S/N: 50 dB)
15.2 dBf (1.58 μV/75 Ω)
Frequency Response (±3.0 dB)
Digital: 20 Hz to 20 kHz*
Analog: 30 Hz to 15 kHz
Signal to Noise Ratio
Digital: 75 dB (STEREO)*
Analog: 68 dB (MONO)
Selectivity (±400 kHz)
≥ 80 dB
Stereo Separation 40 dB (1 kHz)
* Only for DDX5902.
R AM tuner section
Frequency Range (10 kHz)
530 kHz to 1 700 kHz
Usable Sensitivity 29 dBμ
Frequency Response (±3.0 dB)
Digital: 40 Hz to 15 kHz*
Signal to Noise Ratio
Digital: 75 dB (STEREO)*
* Only for DDX5902.
REFERENCESREFERENCES