Filter
Top Products
ENGLISH 69
CONNECTION/INSTALLATIONCONNECTION/INSTALLATION
R Connecting wires to terminals for Toyota Cars (for DDX715WBT)
Pages70 – 71
Pages70 – 71
Page72
USB terminal (0.8 m):
Pages70 – 71
10 A fuse
Connect to the vehicle’s reverse lamp harness when
using the optional rear view camera.
Connect to the vehicle’s parking
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
Light green (Parking
sensor wire)
Connect the antenna
cord to the antenna
terminal.
8
Connect to the vehicle’s steering remote
harness.
• Depending on the type of vehicle, it cannot
be connected.
Purple with white stripe
(Reverse sensor wire)
7
*
1
If no connections are made, do not let the cable come out from the tab.
*
2
When using Antenna Control, connect ANT CONT lead (blue) to A5 (blue) on the wiring harness.
*
1
*
2
Pin Color and functions of Connector A, B, C and D
A1 Orange/White Dimmer
A2 Yellow Battery
A4 Red Ignition (ACC)
A5 Blue Antenna control
A6 Black Ground connection
A8/A7
White ª / White/Black ·
Left speaker (front)
A10/A9
Gray ª / Gray/Black ·
Right speaker (front)
B2/B1
Green ª / Green/Black ·
Left speaker (rear)
B6/B5
Purple ª / Purple/Black ·
Right speaker (rear)
C5 Blue Antenna control
D21 Light green/Red Input 1
D22 Purple/Red Input 2
D23 Gray/Red Ground
When using the optional power amplifier, connect
to its power control terminal.
Not used.
Connect to vehicle’s harness.
Connect to vehicle’s harness.
Connect to vehicle’s harness.
• Depending on the type of vehicle, it
cannot be connected. In this case, connect
the JASO plug directly to the unit.
3
1
Connector B
Connector A
Connector C
Connector D
Blue with white stripe
(Power control wire)
Brown (Mute control wire)