Filter
Top Products
Setting during operation beep sound etc. functions.
The Function Set basic operation method is explained here. The
reference for the Function items and their setting content is after
this operation explanation.
1 Enter Function Set mode
Press the [FNC] button for at least 1 second.
"Function" is displayed.
2 Select the Function Set item
Press the [FM] or [AM] button.
Example: When you want to set the beep sound select the
"BEEP" display.
3 Set the Function Set item
Press the [4] or [¢] button.
Example: When "BEEP" is selected, each time the button is
pressed it switches "BEEP On" or "BEEP Off". Select 1
of them as the setting.
You can continue by returning to step 2 and setting other items.
4 Exit Function Set mode
Press the [FNC] button.
When other items that are applicable to the basic operation method
above are displayed afterwards their setting content chart is
entered. (Normally the uppermost setting in the chart is the original
setting.)
Also, the explanation for items that aren't applicable are entered
step by step.
Function Set
Function Set
— 23 —
DISP
NAME
COLOR
S.A
DISC
B.NR
B.S
FNC
MTL
AUD PWR OFF
#1 – 4
FM/AM
4 ¢
S.AFNC
SCN
SCRL
RDM REP
M.RDM
ATT
SRC
Monaural indicator
AUTO indicator
Function display
DPX-MP4030(M)_U.S r1 02.2.21 11:45 AM Page 23