Filter
Top Products
Setting the method of adjusting Equalizer types.
1 Select Equalizer mode
Press the [FM] or [AM] button.
Select the "EQ" display.
2 Select the method of adjusting Equalizer types
Press the [4] or [¢] button for at least 1 second.
Each time the button is pressed for at least 1 second, method of
adjusting Equalizer type switches as shown below:
Equalizer mode
Setting the Demonstration when Power is turned ON.
Display Setting
"Open On" Demonstration is carried out when Power is
turned ON.
"Open Off" Demonstration is not carried out when Power is
turned ON.
Opening Demonstration
Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)
Display Setting
"Pout R" Rear preout.
"Pout N-F" Non-fading preout.
Switching preout
Setting the operation check sound (beep sound) ON/OFF.
Display Setting
"BEEP On" Beep is heard.
"BEEP Off" Beep canceled.
Touch Sensor Tone
Adjusting the display contrast.
Display and Setting
"CONT 1"
"CONT 7" (Original setting)
"CONT 11"
… …
Contrast Adjustment
<In ALL OFF Mode>
Setting the Illumination Color Mode of your display.
Display Setting
"COL Sync" The color of your display changes from one color to
another during volume adjustment and during
Attenuator being ON.
"COL Fix" Fix the color set.
Illumination Color Mode
Function Set
— 24 —
English
DPX-MP4030(M)_U.S r1 02.2.19 10:32 AM Page 24