Kenwood DPX-3030 Car Stereo System User Manual


 
— 35 —
? The songs in the selected folder aren’t played in Folder Select
mode.77
There are no MP3 in the selected folder.
Make sure there’s recorded content in the MP3 media.
? The MP3 File/Folder search takes time.78
Many files are recorded on the media.
When the media directory is complex, the file/folder search can
take time.
? The MP3 related text isn’t displayed correctly.79
A character is entered that this unit can't display.
For the characters that can be used for MP3 text entry, refer to
<Notes on playing MP3> (page 6).
? The MP3 file time isn’t displayed correctly.80
---
There are times when it isn’t displayed correctly according to the
MP3 recording conditions.
? The songs in the selected folder aren’t played in Folder Select
mode.102
There are no MP3 in the selected folder.
Make sure there’s recorded content in the MP3 media.
If the following situations, consult your nearest service
center:
Even though the disc changer is connected, the Disc Changer source is
not ON, with "AUX" showing in the display during the Changer Mode.
Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87,
KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the
Auxiliary input is entered when switching modes.
The messages shown below display your systems
condition.
EJECT: No disc magazine has been loaded in the changer.
The disc magazine is not completely loaded.E01
Load the disc magazine properly.
No CD in the unit.
Insert the CD.
No Disc: No disc has been loaded in the disc magazine.
E02
Load a disc into the disc magazine.
Error 04: No disc has been loaded in the disc magazine.
E04
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD
is scratched a lot.
Clean the CD and load it correctly.
Error 05: The CD is upside-down.
E05
Load the CD correctly.
Blank: Nothing has been recorded on the MD.
E10
No Track: No tracks are recorded on the MD, although it has a
title.E11
No Music: Media was played that doesn’t have data recorded
that the unit can play. E15
Use media that has data recorded that the unit can
play.
Error 30: The faceplate of the slave unit being connected to
this unit has been removed.
E30
Replace it.
Error 77: The unit is malfunctioning for some reason.
E77
Press the reset button on the unit. If the "Error 77"
code does not disappear, consult your nearest
service center.
DPX-MP4030(M)_U.S r1 02.2.19 10:32 AM Page 35