Filter
Top Products
Adjusting the effect of an Equalizer type selected in <Equalizer
Control> when <Equalizer mode> is "EASY".
1 Refer to <Equalizer Control> (page 9) to select the Equalizer
type.
2 Adjust the effect
Press the [FM] or [AM] button.
Each time the button is pressed, the effects of Equalizer switch
as shown below:
Setting of effect Display
High "Hi"
Medium "Mid"
Low "Lo"
Adjustment of Equalizer type at EASY
When operation stops for 10 seconds, the Equalizer type at that
time is registered and the Equalizer Control mode automatically
closes.
You can recall the best sound setting preset for different types of
the music.
1 Enter the Equalizer Control mode
Press the [EQ] button.
"EQ EASY" or "EQ PRO" is displayed.
2 Select the Equalizer type
Press the [EQ] button.
Each time the button is pressed, the Equalizer type switches as
shown below:
Equalizer type Display
Rock "Rock"
Dance "Dance"
Jazz "Jazz"
Pops "Pops"
Heavy "Heavy"
Soft "Soft"
Sharp "Sharp"
Light "Light"
Flat "Flat"
• "User" display: The values set on the <Adjustment of Equalizer
type at PRO> (page 10).
•A selected Equalizer type can be adjusted.
Adjustment items depend on the setting of <Equalizer mode>
(page 24). Refer to <Adjustment of Equalizer type at EASY> (page
9) or <Adjustment of Equalizer type at PRO> (page 10) for details
of adjustment.
3 Exit the Equalizer Control mode
Press the [EQ] button for at least 1 second.
Equalizer Control
When it’s ON, the "ATT" indicator blinks.
— 9 —
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 9