Filter
Top Products
34
|
DPX-U5130BT/ DPX-U5130
Hands-free phoning
Clearing the disconnection message
Press the [Ú] button.
“HF DISCONCT” disappears.
Making a call by voice dialing
You can make a voice call using the voice
recognition function of the cell-phone.
Press and hold the [Ú] button to start voice
recognize.
“VOICE CONTROL” appears.
Pronounce the name registered in the cell-
phone.
Make a call.
Canceling the voice recognize
Press and hold the [Ú] button.
About voice recognition
• If “NO SUPPORT” appears, your cell-phone does not support
the voice recognition function.
• If “N/A VOICE TAG” appears, your cell-phone cannot start
voice recognition.
• If your voice cannot be recognized, a message appears.
Press and hold the volume knob to terminate voice
recognition. Retry it again from the beginning.
• Audio sound is not output during voice recognition.
Display of phone number types
(categories)
The category items in the phone book are displayed
as follows:
Display Information
Home
Mobile
Office
General
Other
Switching between Two Connected
Cell-phones
When two Bluetooth devices are connected, you
can assign the Bluetooth device to be used in
priority to the other Bluetooth device.
When selecting the priority device using the
button
Press the [Ú] button.
“BT MODE” appears and enter the Bluetooth mode.
Press and hold [Ú] button.
The device given priority is changed.
When selecting the priority device from the
menu
Press the [Ú] button.
“BT MODE” appears and enter the Bluetooth mode.
Use the [Control knob] to select “DVC
PRIORITY”.
For how to use the [Control knob], refer to <How to
select the item> (page 9).
Turn the [Control knob] to select a “MAIN” or
“SUB”.
Press the [Control knob].
When Sub is selected, the device given priority is
changed.
Exit the Bluetooth mode.
Press the [Ú] button.
Notes
• You cannot switch between the connected cell-phones
during downloading of the Phone Book.
• Only the main cell-phone from which you can make a call.
• Both the main and sub cell-phones can receive an
incoming call.
• If the other cell-phone receives an incoming call while you
are talking on the active cell-phone, you must finish the
current call to answer the incoming call to the other cell-
phone.
• If the main cell-phone is disconnected when it is taken out
of the vehicle, the sub cell-phone becomes the main cell-
phone if it is held connected. When the disconnected cell-
phone is brought back into the vehicle, it is reconnected as
the sub cell-phone.
13-2DIN_M_EN_00.indb 34 12/11/26 15:59