Filter
Top Products
English
|
9
Preparations
Exiting the Demonstration mode
Turn o the Demonstration mode when you use the
unit for the rst time after installation.
Press the [Control knob] to quit the
Demonstration mode when the message
“CANCEL DEMO PRESS VOLUME KNOB”
appears (approx. 15 seconds).
Turn the [Control knob] to select the “YES” and
then press the [Control knob].
The Demonstration mode can also be canceled
in the Function Setting mode. Refer to
<Demonstration mode setting> (page 28).
How to select the item
For how to select setting items such as a function
setting item, see the following example:
Example: Adjusting the text scroll of the
display
Press and hold the [AUDIO] button.
“Function” appears and enters the Function setting
mode.
Select the Text scroll function item
INITIAL SET
TUNER SET
DEMO MODE
CLOCK
DISP OFF MODE
DISP DIMMER
SETTINGS
DISP & KEY
TEXT SCROLL
Turn the [Control knob] to select “SETTINGS”,
and then press the [Control knob].
Next, turn the [Control knob] to select “DISP &
KEY”, and then press the [Control knob].
Finally, turn the [Control knob] to select “TEXT
SCROLL, and then press the [Control knob].
Press the [6] button to return to the previous
item.
Turn the [Control knob] to select a value
(AUTO, ONCE, OFF), and then press the
[Control knob].
The previous item appears.
Press and hold the [6] button.
Exit the Function setting mode.
About the description in this manual
“Function” appears and enters the Function setting mode.
2 Use the [Control knob] to select “SETTINGS”
> “DISP
& KEY”
> “TEXT SCROLL”.
3 Use the [Control knob] to select a value (AUTO,
ONCE, OFF).
13-2DIN_M_EN_00.indb 9 12/11/26 15:59