Filter
Top Products
19
EN
Normal playback
Adjusting the sound
Adjusting the TONE
You can adjust the sound quality when the receiver is in the PCM stereo
mode, analog stereo mode.
1 Press the SOUND key to select the SOUND mode.
When input signal is Dolby Digital and STEREO
1 T.SURR ON or OFF : SRS TruSurround
2 TONE : Tone
3 NIGHT ON or OFF : Midnight mode
When input signal is except STEREO
TONE : Tone
• For other input signal, some of mode will not be displayed.
2 Use the TRIM%/fi keys to select TONE and then press SOUND
key.
3 When in TONE ON selection, press the SOUND key for the
following displays.
BASS : Select this to adjust the low frequency range.
TREBLE: Select this to adjust the high frequency range.
4 Use the TRIM%/fi keys to adjust the sound quality.
•The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.
•The adjustment item is displayed for approximately 20 seconds.
VOLUME CONTRO
L
PHONES
VOLUME%¥fi
ACTIVE EQ
SOUND
POWER
TRIM%¥fi
ACTIVE EQ.
MUTE
MUTEDOLBY DEX NEO:6 DSP TS DIGITAL ST.
AUTO
L
LFE SW
CR
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
LS SBS RS
MUTEDOLBY DEX NEO:6 DSP TS DIGITAL ST.
AUTO
L
LFE SW
CR
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
LS SBS RS
MUTEDOLBY DEX NEO:6 DSP TS DIGITAL
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
PHONES
Muting the sound
The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.
Blinks
To cancel
Press the MUTE key again so that the “MUTE” indicator goes off.
•MUTE ON can also be deactivated by turning the pressing
VOLUME CONTROL knob (or VOLUME %/fi keys).
ACTIVE EQ mode
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in PCM and
analog stereo mode.
Press the ACTIVE EQ key for the following selections;
1EQ CINEMA :Effective when watching a movie.
(The ACTIVE EQ. indicator lights up.)
2EQ MUSIC :Effective when listening to music.
(The ACTIVE EQ. indicator lights up.)
3EQ OFF :The ACTIVE EQ function is turned OFF.
(The ACTIVE EQ. indicator goes off.)
• ACTIVE EQ function will not be available when during recording
or DTS-ES MATRIX is ON, and during 96kHz LPCM playback.
Listening with headphones
1 Connect headphones to the PHONES jack.
• Headphones with a stereo mini plug can be connected.
• The sounds from all speakers are cut off.
2 Use the VOLUME CONTROL knob (or VOLUME%/fi keys) to
adjust the volume.
03.8.24, 10:55 PM19