Filter
Top Products
25
EN
Adjustment of each channels’ level
You can adjust each channel’s level duning listening music.
1 Press the FRONT key to adjust FRONT L channel’s level.
2 Use the TRIM%/fi keys to adjust the sound level.
3 Press the FRONT key to adjust FRONT R channel’s level.
4 Use the TRIM%/fi keys to adjust the sound level.
5 Press the FRONT key to return to the input indication.
• The sound level is adjustable from -10 dB to +10dB in 1dB step
increments.
•The adjustment item is displayed for approximately 20 seconds.
• Use the CENTER or SW key to adjust sound level of center or
subwoofer channel.
•Use the REAR key to adjust sound level of surround channel.
And use the REAR key for the following displays.
1 LS : Surround L channel.
2 BS : Surround back channel.
3 RS : Surround R channel.
Convenient functions
MUTEDOLBY DEX NEO:6 DSP TS DIGITAL ST.
AUTO
L
LFE SW
CR
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
LS SBS RS
TRIM%¥fi
SWFRONT
REAR
SOUND
CENTER
Midnight mode (Dolby Digital mode only)
When watching movies at night , you might not be able to raise the volume as
loud as normal. Midnight mode compresses the dynamic range of previously
specified heavy sound passage of the Dolby Digital sound track (like scenes with
sudden increases in volume) to minimize the difference in volume between the
scenes with heavy sound passage and scenes with normal sound passage. This
makes it easy to hear all of the sound track, even when listening at low volumes.
1 Press the SOUND key to enter the SOUND mode.
•This can be selected only if DVD/CD, VIDEO 2 or FRONT AUX is
selected as the source and the listen mode is set to “DOLBY DIGITAL.”
2 Use the TRIM%/fi keys to select the “NIGHT” and then press
the SOUND key.
3 Use the TRIM%/fi keys to select ON or OFF.
1 NIGHT ON : Midnight mode ON.
2 NIGHT OFF : Midnight mode OFF.
4 Press the SOUND key to returm to the input indication.
•The adjustment item is displayed for approximately 20 seconds.
•Some Dolby Digital software may not be compatible with the
Midnight mode.
Display dimmer adjustment
The dimmer function lets you select the brightness of the amplifier's
display. You might find this useful if you darken your room to watch
movies or listen to music.
1 Press the SET UP key to enter the SETUP mode.
2 Use the TRIM%/fi keys to select the “DIMMER”.
3 Press the SET UP key again so that the dimmer setting indication
appears.
Select the brightness level you find most pleasing using TRIM
(%/fi ) keys.
1 DIMMER H : Bright
2 DIMMER L : Dark
4 Press the SET UP key to return to the “DIMMER”.
5 Use the TRIM%/fi keys to select the “EXIT”.
6 Press the SET UP key to return to the input indication.
Sleep timer (SLEEP)
Set the number of minutes after which the unit to be turned OFF.
Connect the related component under reference to “Connecting
audio components”.
Press the SLEEP key to select the time.
•Each press increases the timer period by 10 minites.
The sleep timer can be setup to 90 minites.
10 = 20 = 30 = .... = 80 = 90 = OFF = 10 = 20 = ....
The sleep timer indicator will be lit.
•The sysytem has been setup so taht the display is dimmered automati-
cally while the sleep timer is activated.
•Press the SLEEP key while the sleep timer is activated to check the
remaining time.
To cancel
Turn the amplifier OFF or press the SLEEP key until the sleep time is
caucelled.
96kHz LPCM playback
The amplifier is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode to “STEREO”.
•In FULL AUTO input mode the listen mode will automatically be
STEREO.
•When in D MANUAL input mode (listen mode is not STEREO), “96kHz
LPCM” will appear in the display and no sound can be heard from the
speakers.
Press the LISTEN MODE or STEREO key (the listen mode changes to
the STEREO mode) to output sound from the speakers.
MUTEDOLBY DEX NEO:6 DSP TS DIGITAL ST.
AUTO
L
LFE SW
CR
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
LS S BS RS
03.8.24, 10:57 PM25