Filter
Top Products
English
|
11
Display Type A/ Display Type B
Status Setting
Determine whether the On and Off statuses of
various functions are to be displayed on the Display
Type A/B.
1 Enter Status Setting mode
Using the Control knob, select "DISP" >
"STATUS".
For the operation method, refer to <Function
Control mode> (page 10).
2 Select the Status display
Turn the Control knob.
3 Exit Status Setting mode
Press the Control knob.
Display Type A/ Display Type B
Graphic Display Selection
Changing the graphic Display.
1 Enter Graphic Display Selection mode
Using the Control knob, select "DISP" >
"GRAPH".
For the operation method, refer to <Function
Control mode> (page 10).
2 Select the graphic display
Turn the Control knob or push it towards left
or right.
Select from the following displays:
Graphic display Display
Movie 1 – 2
Wallpaper 1 – 6
Wallpaper scan "SCAN"
3 Exit Graphic Display Selection mode
Press the Control knob.
⁄
• The setting of this function is available while "TYPE
SELECT [A]"/ "TYPE SELECT [B]" is selected for the Display
mode.
⁄
• To change the information by the Display Type, refer
to the page on the following table for the methods to
alternate by the Display Type.
Display Type
ABCDE
Graphic 1
11 11 — — —
Status 2
11 11 — — —
Text 3
—12———
Upper 4
— — 12 12 —
Middle 5
— — 12 12 —
Lower 6
— — 12 12 —
Text 7
————12