Filter
Top Products
24
|
English
CD/USB device/Audio file/External disc control features
Disc Naming (DNPS)
Attaching a title to a CD.
1 Play the disc you want to attach a name to
⁄
• A title cannot be attached to MD or Audio file media.
2 Enter Menu mode
Using the Control knob, select "MENU".
For the operation method, refer to <Function
Control mode> (page 10).
"MENU" is displayed.
3 Select Name set mode
Push the Control knob towards up or down.
Select the "Name Set" display.
4 Enter Name set mode
Press the Control knob for at least 1 second.
5 Move the cursor to the enter character
position
Push the Control knob towards right or left.
6 Select the character type
Press the Control knob.
Each time you press the knob, the character type
alternates between the types shown in the table
below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
7 Select the characters
Turn the Control knob or push it towards up or
down.
⁄
•
You can enter characters by using a remote control with
a number button.
Example: If you enter "DANCE".
Character Button Times pressed
"D" [3] 1
"A" [2] 1
"N" [6] 2
"C" [2] 3
"E" [3] 2
8 Repeat steps 5 through 7 and enter the name.
9 Exit Menu mode
Press the [FNC] button.
⁄
• When operation stops for 10 seconds the name at that
time is registered, and Name Set mode closes.
• Media that you can attach a name to
- Internal CD player: 10 discs.
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
• You can change the name of a CD by the same
operation you used to name it.