Filter
Top Products
English
|
31
Other than Standby mode
B.M.S. Frequency Offset
Setting the central frequency, boosted by B.M.S.
Display Setting
"AMP FREQ : Normal" Boost with the normal central frequency.
"AMP FREQ : Low" Drop the normal central frequency 20%.
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the unit.
1 Select AMP Control mode
Turn the Control knob.
Select the "AMP Control" display.
2 Enter AMP Control mode
Press the Control knob for at least 1 second.
3 Select the AMP Control item for adjustment
Push the Control knob towards up or down.
⁄
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4 Adjust the AMP Control item
Push the Control knob towards right or left.
5 Exit AMP Control mode
Press the [FNC] button.
⁄
• You cannot use the LX AMP operation during standby
mode.
News Bulletin with Timeout Setting
The tuner automatically changes when a news
bulletin starts even if the radio is not being listened
to. Also, you can set the time interval when
interruption is prohibited.
Display and Setting
"News : OFF"
"News : 00min"
…
"News : 90min"
When you set "News : 00min" — "News : 90min",
the News Bulletin Interrupt function is ON.
When the news bulletin starts, "NEWS " is displayed,
and the tuner changes to the news bulletin.
⁄
• If you choose the "News : 20min" setting, further news
bulletins will not be received for 20 minutes once the
first news bulletin is received.
• The news bulletin volume is the same level that was set
for <Traffic Information> (page 17).
• This news bulletin function is only available if the desired
station sends PTY-code for news bulletin or belongs to
<Enhanced Other Network>-Network sending PTY-code
for news bulletin.
• When the News Bulletin Interrupt function is ON, the
tuner changes to an FM station.