Kenwood KDC-X896 Car Amplifier User Manual


 
24
|
KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U
English
|
25
Contents
HD Radio™ tuner control
Function of KDC-X896, KDC-BT852HD
Auto memory
You can automatically store 18 (FM)/ 6 (AM) stations
with good reception in the memory.
Select the Tuner source
Press the [SRC] button.
Select the “HD RADIO” display.
Enter the Function setting mode
Press and hold the Control knob.
Select the Auto memory mode
Select the following items using the Control
knob.
“Settings” > “Auto Memory”
Start storing stations in the Auto memory
mode
Turn the Control knob to select “YES”, and then
press the Control knob.
When 18 (FM)/ 6 (AM) stations that can be received
are stored in the memory, the process in the Auto
memory is completed.
For the basic operations to listen to the HD Radio
tuner, refer to the Quick Start Guide.
This HD Radio receiver enables:
• Program Service Data: Contributes to the superior
user experience of HD Radio Technology. Presents
song name, artist, station IDs, HD2/HD3 Channel
Guide, and other relevant data streams.
• Adjacent to traditional main stations are extra local
FM channels. These HD2/HD3 Channels provide
new, original music as well as deep cuts into
traditional genre.
• Digital, CD-quality sound. HD Radio Technology
enables local radio stations to broadcast a clean
digital signal. AM sounds like today’s FM and FM
sounds like a CD.
• iTunes® Tagging provides you the opportunity to
discover a wide range of content and the means to
“tag” that content for later review and purchase from
the iTunes® Store.
iTunes tagging
You can stores the tag of the information about the
song being received, and send it to the connected
iPod. You can easily find the song on the iTunes
Store according to the tag sent to the iPod.
Store the song information tag
Press and hold the [PRESET] button.
TAG
” will be indicated on the display when song
information can be registered.
“TAG Storing” is indicated on the display while a tag
is being stored in this unit. “TAG Stored” is indicated
on the display after the tag has been stored.
When your iPod is connected to this unit, “TAG
Transferred” is indicated on the display and the tag
is sent to the iPod.
• The song corresponding to the tag sent to the iPod is
indicated in the playlist of the synchronized iTunes or iPod.
By clicking your desired song in the playlist, you can easily
find it on the iTunes Store and buy it from the iTunes Store.
• A total of fifty song information tags can be stored in this
unit including the song information tags stored by the
SiriusXM tuner function mentioned in <iTunes tagging>
(page 64). When a tag has been sent to the iPod, the tag
stored in this unit is cleared.
• Select “ON” for “Tagging” as mentioned in <HD Radio tuner
setting> (page 25) when using this function.
• The memory usage can be checked by selecting the “TAG
Memory” setting mentioned in <HD Radio tuner setting>
(page 25).
HD Radio tuner setting
You can set the HD Radio tuner-related items.
Enter the Function setting mode
Press and hold the Control knob.
Select the Setting mode
Turn the Control knob to select “Settings”, and
then press the Control knob.
Select a desired HD Radio tuner setting item
Turn the Control knob to select a HD Radio
tuner setting item, and then press the Control
knob.
Display Description
“Settings”
“Seek Mode”
Sets the HD Radio tuning mode.
Auto1: Automatic search for a station.
Auto2: Search in order of the stations in the
preset memory.
Manual: Normal manual tuning control.
“Receive mode”
Sets the HD Radio receive mode.
Auto: Automatically tunes to an analog
broadcast when there is no digital
broadcast.
Digital: Digital broadcasts only.
Analog: Analog broadcasts only.
“TAG Memory” Displays the tag memory usage of the HD
Radio tuner and SiriusXM tuner. Up to 50 tags
can be registered in this unit.
“Tagging”
Turns ON / OFF the iTunes tag memory
function of HD Radio tuner.
“ON” / “OFF”
( : Factory setting)
Select a setting and determine
Turn the Control knob to select a desired
setting, and then press the Control knob.
The previous item is displayed.
Exit the Function setting mode
Press and hold the [ ] button.