Filter
Top Products
46
|
KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U
English
|
47
Contents
Operation for hands-free phoning
Function of KDC-X896, KDC-BT852HD
Speed dialing (Preset dial)
Enter the Bluetooth mode
Press the [ ] button.
“BT MODE” is displayed.
Select the Preset dial mode
Turn the Control knob to select “Preset Call”,
and then press the Control knob.
Select the number you want to recall from the
memory
Turn the Control knob to select a recall number
(“P1” – “P6”), and then press the Control knob.
Make a call
Press the [ ] button.
⁄
• You need to register the preset dial number. Refer to
<Registering in the preset dial number list> (page 46).
Registering in the preset dial number
list
Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dialing a number/ Calling a number in the call log/
Calling a number in the phone book
Enter the Preset memory mode
Press the [PRESET] button.
Select a number and store it in the memory
Turn the Control knob to select memory
number (“P1” – “P6”), and then press and hold
the Control knob.
Canceling the Preset memory mode
Press the [ ] button.
During a call
Disconnecting a call
Press the [SRC] button.
Switching to the Private mode
Push the Control knob rightward or leftward.
Pressing this knob each time switches between the
private talk mode (“PRIVATE”) and hands-free talk
mode.
⁄
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection. If
this happens, the source cannot be switched back to the
hands-free talk mode by operating this unit. Operate your
cell-phone to return to the hands-free talk mode.
Adjusting the voice volume during a call
Turn the Control knob.
Call waiting
Answering another incoming call with the
current call suspended
Press the [ ] button.
Answering another incoming call after
terminating the current call
Press the [SRC] button.
Continuing the current call
Press the Control knob.
Turn the Control knob to select “Reject”, and
then press the Control knob.
Answering the waiting call after terminating
the current call
Press the [ ] button.
Switching between the current call and waiting
call
Press the Control knob.
Pressing this knob each time switches between the
calling parties.