Filter
Top Products
Connecting Wires to Terminals
1/
/°
ÊÊÊ" /
*°" /
," /ÊUÊ
," /ÊUÊ,
,,ÊUÊ
,,ÊUÊ,
q
³
,,
," /
FM/AM antenna input
Fuse (10A)
Wiring harness
(Accessory1)
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) -
(To a negative ground point of the vessel)
Ignition key
switch
Fuse box
(Main fuse)
ACC
Fuse box
Battery
If no connections are made, do not let the wire come out
from the tab.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
To Kenwood disc changer/
Sirius satellite radio tuner/
External optional accessory
To connect these leads, refer to
the relevant instruction manuals.
TEL mute wire (Brown)
Connect to the terminal that is grounded when either
the telephone rings or during conversation.
KTS-MP400MR KTS-300MR
A Rear output –
B Front output Front output
C Subwoofer output Rear output/ Subwoofer output
Left output (White), Right output (Red)
A
B
C
Not Used (Blue)
Do not let the wire come out from the tab.
Power control/Antenna control wire
(Blue/White)
Connect either to the power control terminal when
using the optional power amplifier, or to the antenna
control terminal in the vessel.
To Wired remote controller
Dimmer control wire (Orange / White)
To light control switch
External amplifier control wire
(Pink/Black)
To "EXT.AMP.CONT." terminal of the amplifier having the
external amp control function.
30
|
English