Filter
Top Products
phase
MMEENNUU
- Here is where you can adjust the selected group’s polarity output between 0 or 180
degrees. All amplifiers in the group will be adjusted.
Use the or keys to select from 0 degree or180 degree.
Press the key to save your setting
When you are done adjusting the phase in this group press the key to
return to the GROUP ADJ menu and choose another function to adjust.
NOTE: While you are in the PHASE menu the PHASE indicator on the ISIS display is lit. This indicates
you are making adjustments in the PHASE menu.
By default, all channels in all amplifiers are set to 0 Degree.
mute
MMEENNUU
- Here is where you can mute the output in the selected group for setup or testing
purposes.
Use the or keys to select from mute on or mute off. Press
the key to save your setting and return to the GROUP ADJ menu and
choose another function to adjust.
NOTE: While you are in the MUTE menu the MUTE indicator on the ISIS display is lit. This indicates you
are making adjustments in the MUTE menu.
If you exit the MUTE menu with the amplifier muted (Mute On), the MUTE
indicator in the ISIS display will begin flashing to indicate this.
The MUTE indicator will stop flashing once you un-mute the amplifier.
LIMITER
MMEENNUU
- Here you can adjust the selected group’s Limiter settings. The function will vary
depending on if this is a LINK ON or LINK OFF group. Both functions are described below.
LLIINNKK OONN
In a LINK ON group, each amplifier in the group shares the exact same Limiter setting.
Use the or keys to adjust the RMS Output on the Warhorse
Amplifier. Pressing the UP arrow increases RMS output on all of the amplifiers in the
group, while pressing the DOWN arrow reduces the RMS output of all the amplifiers
in the group.
Press the key to save your setting and return to the GROUP ADJ menu
and choose another function to adjust.
LLIINNKK OOFFFF
In a LINK OFF group, each amplifier in the group has its own unique Limiter setting that has been
selected from the AMP ADJ menu. Here you can, as a group, turn the Limiter OFF or ON, ON being the
individual setting you selected from the AMP ADJ menu.
Use the or keys to scroll through off and ON.
Press the key to save your setting and return to the GROUP ADJ menu and
choose another function to adjust.
NOTE: While you are in the Limiter menu the LIMITER indicator on the ISIS display is lit. This indicates
you are making adjustments in the Limiter menu.
See the operation page in this manual for a brief description for setting the Limiter.
GAIN RANGE
MMEENNUU
- Here you can adjust the selected group’s UltraMatch™ digital input gain
range. The UltraMatch™ gain structure features four selectable Gain Ranges (1 volt, 2 volt,
5 volt, 10 volt).
In “Gear-Head” terms, the Gain Range represents what gear you’re in and the Gain adjustment
represents stepping on the gas. In this menu you are adjusting the gear box. This group adjustment
sets the Gain Range of all the amplifiers in the group to the same setting. THE GAIN RANGE OF YOUR
AMPLIFIER NEEDS TO BE CORRECTLY ADJUSTED TO PROVIDE MAXIMUM PERFORMANCE!
Use the and keys to scroll through 1v range, 2v range, 5v
range
, 10v range.
Press the key to save your setting and return to the GROUP ADJ menu to
select another group function to adjust.
NOTE: While you are in the GAIN RANGE menu the SYS and GAIN indicators on the ISIS display are
lit. This indicates you are making adjustments in the GAIN RANGE menu.
The GAIN RANGE function is a SYSTEM menu function and that is why the
SYS and the GAIN indicators are lit while adjusting the GAIN RANGE
function.
noise GEN
MMEENNUU
- Here you can activate the selected group’s integrated pink noise generator for
testing and troubleshooting your system. Pink noise is a sound made up of equal energy at all 1/3
octaves from 20 Hz to 20 kHz and sounds like the static between radio stations. When activated, pink
noise is generated by all the WX Series amplifier’s in this selected group.
Use the or keys to scroll through noise off and noise on.
Press the key to save your setting and return to the GROUP ADJ menu and
choose another function to adjust.
NOTE: When the pink noise is activated (NOISE ON) the LEFT and RIGHT indicators on the ISIS
display will begin blinking. This indicates that the PINK NOISE generator is active.
If you exit the PINK NOISE menu with the generator on (NOISE ON) the left and RIGHT indicators
in the ISIS display will stay flashing to indicate this.
The LEFT and RIGHT indicators will stop flashing once you turn off
(NOISE OFF) the pink noise generator.
WXRCREMOTECONTROL
GROUP ADJUSTMENT
GROUP ADJUSTMENT
2120