Filter
Top Products
Once you select the LINK menu, a list of all 10 groups controlled by the
WXRC will be displayed in a scrolling list. The list will either display the names
you have created or the default names if you have not re-named them.
Use the or keys to scroll through the list of groups and press
the key to select.
Use the or keys to select LINK ON or LINK OFF for the group.
When done selecting the current group’s Link property, press the key to
save the setting and return to the list of groups.
You can now select another group to view or adjust by using the or
keys and select it by pushing the key.
OR
Press the key to return to the GROUP AMPS menu and select another
function.
REMOTE VOL
MMEENNUU
- Here you can choose to have the selected group’s output level controlled by
the Digital Remote Volume Control (DRVC).
If you wish to use the DRVC as a master volume control, raising and lowering the output level of all
the amplifiers, select all the groups and set to them REMOTE ON. By default, all groups are set to
REMOTE OFF.
Use the or keys to scroll through the list of groups and press the
key to select.
Use the or keys to scroll through REMOTE ON and REMOTE
OFF
When done selecting the current group’s Remote Vol setting, press the key
to save the setting and return to the list of groups.
WXRC NAME
MMEENNUU
- Here you can change the default name of the WXRC controller (-WXRC-) to
any 10 character name you want. This is the name that scrolls in the DEFAULT menu.
Use the and keys to move the blinking cursor left or right to select
which character you want to change.
Use the and keys to change the selected character. (A B C ...1
2 3
...etc.)
When you are finished press and hold the key for 1.5 seconds to save
your new WXRC name. You are now back in the WXRC SETUP menu.
MEM NAME
MMEENNUU
- Here you can change the default name of each of the four global memories
(memory-1 to memory-4) to any 10 character name you want. Very useful for identifying a preset by
its purpose (SPL, SOUND Q, ROCK, RAP, etc).
Use the or keys to scroll through the
available memories (memory-1 through memory-4)
When you have the memory selected that you want to name simply press the
key to select it.
You can now use the and keys to move the blinking cursor left or
right to select which character you want to change.
Use the and keys to change the selected character.
(A B C ...1 2 3 ...etc.)
When you are finished press and hold the key for 1.5 seconds to save
your new group name.
You can now select another Memory Name to re-name or press the key to
return to the WXRC SETUP menu.
AMP NAME
MMEENNUU
- Here you can change the default name of each WX Series amplifier to any 10
character name you want.
Use the or keys to scroll through the amplifiers connected to the
WXRC.
When you have the amplifier selected that you want to re-name simply press the
key to select it.
You can now use the and keys to move the blinking cursor left or
right to select which character you want to change.
Use the and keys to change the selected character.
(A B C ...1 2 3 ...etc.)
When you are finished press and hold the key for 1.5 seconds to save
your new amplifier name.
You can now select another amplifier to re-name or press the key to return
to the WXRC SETUP menu.
PPRREESSSS
&&
HHOOLLDD
PPRREESSSS
&&
HHOOLLDD
PPRREESSSS
&&
HHOOLLDD
WXRCREMOTECONTROL
WXRC SETUP
WXRC SETUP
2928