- 16 -
USB port
playback
You can connect an MP3 player or another USB
data carrier to the USB port on the front panel of
the device. Your car radio can handle USB data
carriers up to 1 GB. With this the directory structure
may contain a maximum of 1024 folders, 4096 files
and a directory depth of 8 levels.
• Remove the protective cap from the USB port.
• Connect your USB device to the port. The car
radio searches for MP3 or WMA files on the
data carrier and the notice USB appears in the
display.
• The operations for playing files on the external
data carrier as well as the search function are
exactly the same as with MP3-CDs.
• If the device is in another mode (CD or card
reader) you can select the USB port with the
MD/LD button.
• Place the protective cap back on the USB port
when no USB device is connected to avoid con-
tamination.
Card reader
Your car radio is equipped with a memory card slot
for SD and Multimedia cards.
playback
• Slide a memory card into the memory card slot
with the marking pointing to the right. Playback
of the MP3 or WMA title on the memory card
begins automatically.
• The operations for playing files, function exactly
the same as for MP3-CDs.
• If the device is in another mode (CD, Radio,
AUX or USB) you can select the card reader
with the
MD/LD button.
Record function
Note:
Please observe the legal regulations valid in
your place of residence regarding the duplica-
tion of copyrighted works. In case of doubt
please consult a specialist in your area.
Recording from audio CDs
With your car radio you can record files from the
CD player to an external USB data carrier or an
SD/MMC card.
• In audio CD mode hold down the
SCN/REC
button.
The notice USB ALL appears (When the recording
target is MMC MMC ALL appears).
• Press the
SCN/REC button to select either the recording
option USB/MMC-ALL (Record all titles) or
USB/MMC -ONE (Record one title).
• Start recording by pressing the
BND/ENT button.
The audio file is now saved in the format set before-
hand (MP3 or WMA, see page 11 "REC settings -
recording format") on the data carrier. At the begin-
ning of the recording the notice RECORD appears
in the display.
After that the recording is characterized by a prefixed
"R".
Note
When the USB data carrier is full the recording
automatically switches to the card reader, so
long as a memory card is inserted (see the fol-
lowing chapter).
• To stop the recording press briefly the
BND/ENT
button once more. After WAIT is shown briefly in
the display, the recording is saved.
IB_KH2375_VY3995_LB3A 23.04.2008 10:51 Uhr Seite 16