Kramer Electronics TP-305A Car Satellite TV System User Manual


 
Overview
3
3 Overview
The TP-305A UXGA - Audio - RS-232 Line Receiver/DA receives a CAT 5
signal from a transmitter
1
and distributes it to up to five other receivers (via
CAT 5 cables). The TP-305A also decodes the CAT 5 signal and distributes
it to a UXGA output, an analog audio output, a digital audio output and an
RS-232 output.
The TP-305A serves as a power center that can distribute power to both the
transmitter and the connected receivers (see section 3.1
).
In particular, the TP-305A features:
Resolution of up to UXGA
UXGA output on a 15-pin HD computer graphics video connector
Digital audio output (S/PDIF) on an RCA connector and an analog
audio output on a 3.5mm mini jack
A transmission range of up to 300ft (up to 100 meters) over STP
cabling
Changeable polarity of the encoded H and V Sync for video (UXGA)
EQ. and LEVEL controls for the video (UXGA) output
To achieve the best performance:
Use only good quality connection cables
2
to avoid interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables).
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer TP-305A
away from moisture, excessive sunlight and dust
1 For example, the Kramer TP-121, TP-123 or TP-45
2 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com