Filter
Top Products
33
You can check that the receiver has successfully connected to the
Internet from the technical information page. Press
to display
the General menu (or, if you are no longer on the System menu
page, first press
) and use the button to highlight the
“Information” option, then press
.
If the IP address item shows a number in four sections separated by
dots, then the receiver is connected to your local network. If online
services still do not work, you should check your router’s connection
to the internet. If “Not Connected” is shown, you should carefully
check the broadband connection and the Network Configuration.
WATCHING ON DEMAND TV
You can switch to On Demand TV either through the interactive
services on a channel providing online TV, or through an online
channel chosen by number or using the channel list or programme
guide.
When you switch to an On Demand TV channel, it may take a few
seconds longer to show the picture than a Freesat satellite channel. You
will then need to progress through a series of menus, using the number
buttons, the coloured buttons,
, , and , and the
button,
to find and start the programme you want to watch. You go through
these menus in a different way depending on the online broadcaster.
HINT: The online TV channels are numbered from 900 and
are in the On Demand section of the programme guide