Filter
Top Products
42
Chapter5PowerSavingFunctions
5-2. Sets the brightness of the indicator
The brightness of the power indicator (blue) and the function indicator below the operation keys when the screen is
displayed can be set. (The both indicators are set to light up when the power is switched on, and are set to 4 by
default.)
Procedure
1. Choose “PowerManager” from the Adjustment menu, and press
.
2. Choose “Indicator” from “PowerManager”, and press
.
3. Select the indicator brightness “Off” or in the range from 1 to 7 with
or as desired.
4. Press
to exit.
5-3. Setting DisplayPort Power Save
This function allows you to change the power setting of the DisplayPort of the monitor.
Attention
• For the “On” setting, the position of the window may be changed when the signal is switched. In such a case, turn the setting
to “Off”.
Procedure
1. Press
to turn off the monitor.
2. Holding
down, press for at least two seconds to turn on the monitor.
The “Optional Settings” menu appears.
3. Choose “DP Power Save” from “Optional Settings”, and press .
4. Select “On” or “Off” with
or , and press .
5. Select “Finish” with
or .
6. Press
.