Filter
Top Products
10
Handsfree Operation
Receive Call
Pairing the Unit with Mobile Phone via Bluetooth Wireless Technology
Attention!! This car radio unit is compatible with the latest profile Bluetooth. It is inevitably possible that
certain mobile telephones are not compatible concerning the communications as well as the identification
numbers.
l Press “MUTE” button about 5 seconds until “PAIRING” show on display.
l Turn ON connection via Bluetooth wireless technology from the mobile phone Menu, then search new
paired device.
l Select “BHF101K” and entering password “0000” to start pairing. Once pairng is completed, “PHONE”
indicator will show on display and it is ready to start mobile phone handsfree operation.
l If pairing cannot be completed in 2 minutes, press “MUTE” button once more to start “PAIRING” again
and re-start the procedure again from above until “PHONE” indicator is appeared on display.
Ensure that your mobile phone is compatible with Bluetooth 1.2 or 2.0
l Outgoing Call – Dial the number on the phone and hear voice from car speakers.
l answering Call – Press “TK” button once to accept incoming call.
l Hang Up – Press “TK” button once to end communication.
l Last Number Redial – Shortly press “TK” button twice to dialing the last outgoing number.
l Reject Call – When there is incoming call, press “TK” button more than 2 seconds to reject the call.
l Transfer Call to Phone – When using handfree for talking, press “TK” button more than 2 seconds to
transfer listening of call from car speakers to phone.
l When you receive a call from mobile phone, the LCD display will show the incoming telephone number (if
this service available from telecom carrier) and the unit volume will mute.
l If you accept a call, press “TK” button to start conversation.
l The incoming call can be heard directly from car radio speaker. The driver can start to talk by through the
built-in microphone on the panel. (See Figure B)
FIGURE B
Built-in microphone