Nextar N CU 160 Car Stereo System User Manual


 
7
10. MODE SELECTION
Press this button to select Radio (TUNER), CD/MP3/WMA (S-CDP), USB (USB-DRIV) or SD/MMC (MEM-
CARD) mode.
11. STEREO/MONO CONTROL
Press this button to select FM STEREO or MONO reception.
12. TALK BUTTON
Press this button for Bluetooth wireless technology operation (please refer to the “Handsfree Operation” for
details).
13. LOUD CONTROL / LOCAL-DISTANT SELECTOR
14. VOLUME/SELECTION CONTROL
Rotate the button anti-clockwise to decrease, or clockwise to increase volume level.
AUDIO LEVEL CONTROL (WHEN PUSHING ONE AFTER ANOTHER)
Press this button shortly one after another to show VOL/BAS/TRE/BAL/FAD control.
AUDIO/SETTING SELECT (HOLD MORE THAN 2 SECONDS)
When pressing the button for more than 2 seconds, it activates as unit setting selection in cyclical mode as
following. The unit setting can be changed by rotating the button clockwise or anti-clockwise.
lVOLUME - Press this button once, then rotate anti-clockwise to decrease, or clockwise to increase
volume level.
lBASS - Press this button once, then rotate anti-clockwise to decrease, or clockwise to increase bass
level.
lTREBLE - Press this button once, then rotate anti-clockwise to decrease, or clockwise to increase
treble level.
lBALANCE - Press this button once, then rotate anti-clockwise or clockwise to level balance of speaker
right and left.
lFADER - Press this button once, then rotate anti-clockwise or clockwise to level fader of speaker front
and rear.
lDSP OFF / POP M / ROCK M / CLASS M / FLAT M
lESP 12 / ESP 45 (setting 12 seconds or 45 seconds of electronic anti-shock time for audio CD)
lMULT OFF / MULT ON (not available for this model)
lBEEP ON / BEEP OFF (not available for this model)
lSEEK 1 (tune up/down buttons performs fast tune function) / SEEK 2 (tune up/down buttons performs
auto tuning function when pressed more than 1 second)
lCOLOR 1 / COLOR 2 (not available for this model)
lVOL LAST / VOL ADJ (preset volume level when unit turn on)
15/16. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN CONTROL
On radio mode, press the button will tune one frequency step higher or lower. Pressing the button more than
1 second can performs fast tuning function or auto tuning function.
17. STATION PRESET BUTTON (1-6)
The PRESET BUTTONS on the unit are used to store station frequencies which you may wish to recall. Each
preset button can store FM1, FM2, FM3, AM1, AM2 band station frequency. Pressing the button momentarily
recalls the station frequency which was memorized. There are 6 preset buttons, giving you capability of storing
18FM / 12AM.
On CD/MP3/WMA/USB-DRIV/MEM-CARD mode, press this button will locate the beginning of the track
being played or will locate the beginning of the next track. When pressing more than 2 seconds, it will
move fast forward or fast backward to a specific position.
For Loud Function
Briefly press this button to activate the loudness circuitry which compensates for loss of high and low
frequencies during low volume levels.
For Local-Distant Function
When pressing the button for more than 2 seconds, it activates to prevent strong local stations from
overlapping weaker stations. For normal operation, press this button again for distance.