Filter
Top Products
35
Playing CDs—Continued
With the MP3 preferences, you can change the way MP3
file information is displayed and the way MP3 CDs are
played.
The MP3 preferences can be set only when the input
source is set to CD and playback is stopped.
To cancel the procedure at any point, press the
[MENU/NO] button.
Preferences
Bad Name?
This preference determines whether or not file and folder
names that contain undisplayable characters are replaced
with “File_n” or “Folder_n”, “n” being the file or folder
number. When set to “Not Replace”, displayable charac-
ters are displayed and underscore characters are used in
place of any undisplayable characters.
For ID3 tags, underscore characters are used in place of
undisplayable characters regardless of this preference.
Note:
On the CR-525UKD, this setting will be reflected even
when playing MP3 and WMA files from a USB mass stor-
age device that is connected to the USB port of the CR-
525UKD.
CD Extra?
This preference applies to CD Extra discs and deter-
mines whether music in the audio session or MP3 files in
the data session are played.
Joliet?
This preference applies to MP3 discs in Joliet format and
determines whether the CD receiver reads the SVD data
or treats the disc as an ISO 9660 disc. Normally, this
preference doesn’t need to be changed.
SVD (Supplementary Volume Descriptor) supports long
file and folder names and characters other than letters
and numbers. Some CD burning software refers to the
Joliet format as “Windows format”.
Hide Number?
This preference determines whether or not the numbers
at the beginning of file and folder names are hidden.
When you create an MP3 CD on a personal computer,
you cannot normally determine the playback order of the
files. However, if you number the MP3 files in order,
starting with 01, 02, 03, and so on, they will play in that
order. If you don’t want these numbers to appear on the
display, choose “Enable”.
Setting MP3 Preferences
1
Press the [MENU/NO] button
repeatedly until “Bad Name?”
appears.
2
Use the Previous and Next
[ ]/[ ] buttons to select the
preference you want to change.
The preferences are explained in the next
column.
3
Press [ENTER].
4
Use the Previous and Next
[ ]/[ ] buttons to select the
preference’s options.
5
Press [ENTER].
When the preference has been set, “Com-
plete” appears on the display.
/
MENU/NO
ENTER
Replace
Not Replace (default)
Audio: Music in the audio session will be played
(default).
MP3: MP3 files will be played.
Use SVD: Reads in SVD data (default).
ISO9660: Will be read in as ISO9660 format.
Disable: The file and folder name, including
numbers, will be displayed as is
(default).
Enable: The file and folder name will be dis-
played but numbers will be hidden.
Continued on the following page.