Onkyo CR-525UKD Car Stereo System User Manual


 
55
Using the Timers—Continued
Notes:
You must set the clock before you can program the tim-
ers.
Before programming a timer to turn on the radio, you
must preset the station you want to use. (See pages 46 and
47.)
If you don’t operate any buttons for 60 seconds while pro-
gramming a timer, the procedure will be cancelled and
the previous display will reappear.
Programming the Timers
1
Press the [TIMER] button repeat-
edly to select Timer 1, 2, 3, or 4,
and then press [ENTER].
If “Clock” appears, you need to set the
clock (see pages 24, 52, and 53).
2
Use the Previous and Next [ ]/
[ ] buttons to select “Play” or
“Rec”, and then press [ENTER].
If you can’t select “Rec”, make sure that
your Onkyo cassette deck or MD
recorder is properly connected to the
MD/TAPE jacks (see pages 21 and 22)
and the Input Display is set accordingly
(see page 27).
/
TIMER
STANDBY/ON
ENTER
Number buttons
or
3
Use the Previous and Next [ ]/
[ ] buttons to select the source,
and then press [ENTER].
You can select the following sources:
CR-525UKD
FM, AM, TAPE, USB, DOCK, CD
or DAB.
CR-425UKD/CR-325UKD
FM, AM, TAPE, DOCK, CD or
DAB.
If you selected “Rec”, only “FM”, “AM”
or “DAB” can be selected as the source.
4
If you selected “AM”, “FM” or
“DAB”, use the Previous and Next
[ ]/[ ] buttons to select the
radio preset, and then press
[ENTER].
5
If you selected “Rec”, make sure
the name of the connected
recorder is flashing on the display,
and then press [ENTER].
6
Use the Previous and Next [ ]/
[ ] buttons to select “Once” or
“Every”, and then press [ENTER].
Select “Once” for on-off operation.
Select “Every” to perform the same oper-
ation every week.