Filter
Top Products
30
En
The power can be switched off after a specified amount
of time.
The unit can be programmed to turn on at a specified time.
• Adjust the clock before setting the timer.
Do not forget to turn the unit to standby, or the timer
will not work.
If the timer reaches the timer-on time, the unit is set to
“SLEEP 60” automatically and the power will be turned
standby 60 minutes later.
If you want to listen continuously, press SLEEP
repeatedly to select “SLEEP OFF” before reaches the
timer-off-time.
Listening to an External Source
1
Connect a cassette tape deck etc. to LINE 1 IN
jack of the unit using commercially-available
RCA cables.
Or Connect the audio output jack of a portable
audio player to the LINE 2 IN jack of the unit.
• When you connect the portable audio player to
LINE 2 IN jack of the unit, use the stereo mini plug
cable.
2
Press LINE to select “LINE1 Source” or “LINE2
Source”.
3
Play the source, and adjust the volume using
VOL of the unit and of the audio player.
You can also adjust the volume by using the
VOLUME knob on the unit.
Sleep Timer
Press SLEEP repeatedly until desired time
appears on the display.
`SLEEP 10, 20, 30, 60 or 90:
The power will be switched off 90 (60, 30, 20,
or 10) minutes later.
`SLEEP OFF:
The sleep timer is off.
• If you want to check the remaining time, press
SLEEP once. The remaining time will be
displayed for 3 seconds, and then return to the
normal display.
Wake Up Timer
1
If the unit is on, press ON/STANDBY to turn
the unit standby.
2
Press CLOCK to show the time on the display.
3
Press TIMER.
“Timer Set” appears on the display, and the “hour”
value starts blinking.
• When no button is pressed for 30 seconds, the
timer setting mode will be cancelled.
4
Press VOL to set the start time (hour), and
then press TIMER.
The “minutes” value starts blinking.
5
Press VOL to set the start time (minute), and
then press TIMER.
The “Off” starts blinking.
6
Press VOL to turn On or Off the timer
function, and then press TIMER.
Select “On” to turn the timer function on. The
TIMER indicator ( ) appears on the display.
When you do not use the timer, select “Off”. (The
TIMER indicator disappears from the display.)
7
Turn the unit on and prepare the source.
• To play a disc, select “DVD Source” using INPUT
and set a disc.
• To play a USB flash drive, select “USB Source”
using INPUT and set a USB flash drive.
• To listen to the FM, select “FM Radio” using
INPUT and tune in a station.
8
Press ON/STANDBY to turn the unit standby.
• The unit will turn on at the specified time every
day.
• The unit turns on with the source that was last
selected.