Panasonic SC-MAX770 Car Stereo System User Manual


 
VQT5K75
8
1 Press [PLAY MENU] to select “PLAYMODE” or
“REPEAT”.
2 Press [2, 1] and then press [OK] to select the
desired mode.
Note:
The setting returns to the default “OFF PLAYMODE” when
you open the disc tray.
This function allows you to program up to 24 tracks.
1 Press [PROGRAM] in the stop mode.
“PGM” or “PROGRAM” is shown.
2
Press the alphanumeric buttons to select the desired track.
Do this step again to program other tracks.
1 Press [3, 4] to select the desired album.
2 Press [9] and then press the alphanumeric
buttons to select the desired track.
3 Press [OK].
Do these steps again to program other tracks.
3 Press [1/;] to start playback.
Note:
You cannot use program playback together with
“PLAYMODE” function.
The program memory is cleared when you open the disc tray.
Note on disc
This system can play CD-R/RW with CD-DA or MP3 format content.
Some CD-R/RW cannot be played because of the
condition of the recording.
MP3 files are defined as tracks and folders are defined as albums.
This system can access up to:
- CD-DA: 99 tracks
- MP3: 999 tracks, 255 albums
Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
Recordings will not necessarily be played in the order you
recorded them.
USB and internal memory
You can connect and play music tracks from your USB
device.
You can also record sound or music tracks into the
internal memory in “.mp3” format.
This system can play or record up to 800 folders
(maximum 999 tracks in an album) or a total of
8000 tracks, depending on the available storage
capacity.
Preparation
Before you connect a USB device to the system, make
sure you do a backup of the data.
Do not use a USB extension cable. The system cannot
recognize USB device connected through a cable.
Decrease the volume and connect the USB device to
the USB port.
Hold the main unit when connecting or disconnecting the
USB device.
Play menu
PLAYMODE
•OFF PLAYMODE
Play all tracks.
1-TRACK
Play one selected track on the disc.
Press the alphanumeric buttons to select the track.
1-ALBUM
Play one selected album on the disc.
Press [3, 4] to select the album.
RANDOM
Play a disc randomly.
1-ALBUM RANDOM
Play all tracks in one selected album randomly.
Press [3, 4] to select the album.
REPEAT
ON REPEAT
Repeat playback.
`” appears.
•OFF REPEAT
Cancel repeat playback.
Program playback
Cancel program mode
Press [PROGRAM] in the stop mode.
Check program contents
Press [
:
] or [
9
] when “PGM” is shown in the stop mode.
Clear the last track
Press [DEL] in the stop mode.
Clear all programmed tracks
Press [] in the stop mode.
“CLR ALL” is shown.
Within 5 seconds, press [] again.
Connecting a USB device
ILLUMINATION
PLAY
A
B
REC/PLAY
USB device
(not supplied)
SC-MAX770PU_eng.book 8 ページ 2014年3月6日 木曜日 午後2時54分