Filter
Top Products
- 73 -
Advanced settings
1. Display the menu with MENU.
2. Select Sound with
/ and press OK to access.
3. Select one of the following items with
/ and press OK to access.
MPX / Audio Preference / SPDIF Selection / SPDIF Delay / HDMI Input /
DisplayPort Input / ARC Output
4. Set with
/ and press OK to store.
MPX
Selects multiplex sound mode (if available).
Stereo:
Use this normally.
Mono:
When stereo signal cannot be received
M1 / M2:
Available while mono signal is transmitted
●
For Analogue
Audio Preference
(Auto / Multichannel / Stereo / MPEG)
●
Selectable options vary depending on the country you select.
Selects the initial setting for audio tracks.
Auto:
Automatically selects the audio tracks if a programme has more than
two tracks. The priority is given in the following order - Dolby Digital
Plus, HE-AAC, Dolby Digital, MPEG.
Multichannel:
The priority is given to multi-channel audio track.
Stereo:
The priority is given to stereo (2ch) audio track.
MPEG:
The priority is given to MPEG.
●
Dolby Digital Plus and Dolby Digital are the methods of coding digital
signals developed by Dolby Laboratories. Apart from stereo (2ch) audio,
these signals can be multi-channel audio.