Filter
Top Products
Optional Wall-mounting Kit (KX-B063)
41
Installation Manual
English
●Attaching to plasterboard walls
Split-wing toggles (sold in stores) are needed.
●
Attaching to wooden walls
Use wood screws (sold in stores).
Insert each bolt through a hole
in the wall-mounting fixture and
into the hole in the wall beneath
so that the arms of the split-
wing toggle are horizontal. For
the correct hole size, refer to the
instructions for the particular
split-wing toggles used.
After the arms expand, pull the
wall-mounting fixture out until
the arms of the split-wing toggle
grip firmly into the wall.
Tighten each bolt until the wall-
mounting fixture is securely
fixed to the wall.
Plasterboard
Split-wing toggle
Wall-mounting
fixture
Bolt
Arms
Arms
For the correct hole size, refer
to the instructions for the
particular wood screws used.
Wall-mounting fixture
Wood screw
Wooden wall