Filter
Top Products
14 OPERATION
English
8 By using the arrow button or , choose whether
- the channels found are to be added to the old list
(standard setting),
- the old channel list is to be overwritten,
- the new found channels are to be discarded.
9 Then press the OK button.
Expert scan mode
This type of scan mode enables the specific search for an
individual channel. This in particular makes sense if you
only want to include one individual channel into your
channel list and you know the information on the channel
and frequency.
1 Highlight the expert scan mode and press the OK but-
ton.
2 Successively select the adjustable values by using the
arrow button
or .
- The desired frequency is set by the arrow button
or .
- The frequency in MHz is entered via the numerical
buttons of the remote control.
- The desired band width is set via the arrow buttons.
3 Choose whether all channels or channels that are free-
to-air only are to be searched for.
4 Then highlight OK and press the OK button to start the
expert scan mode.
Following, the scan mode is started.
- If some channels were found, you receive the same
request as with regard to the automatic scan mode, see
previous paragraph.
- If no channels were found, a message is displayed. Press
the OK button.
EPG
The electronic programme guide (EPG) offers you an
overview of all programmes to be broadcasted in the next
week on the current channel.
Observe:
- Not all channels offer an extensive EPG.
- Many broadcasting services broadcast the current day
programme but do not offer detailed descriptions.
- There are broadcasting services that do not offer any
EPG information.
- Due to the progressive technical development, more
and more broadcasting services will extend this offer in
the future.
1 Select the desired channel.
2 Press the EPG button to call up the electronic pro-
gramme guide.
The following functions are offered to you by the EPG:
- If you require more information on a programme, high-
light it by using the arrow button
or , and press
the INFO button.
- Change to the programme of another day by using the
arrow button . By means of the arrow button
you can return.
- In order to switch between the programmes of the
afternoon and evening, press the colour buttons dis-
played in the EPG.
Note: Depending on the time of day, also "tomorrow" may be
displayed.
- By pressing the channel + or - button, you can view
the EPG of another channel.
- If you want to adopt a programme into the timer list,
highlight it and press the TIMER/REC button.
Acknowledge the following request by pressing the OK
button.
Note: Detailed information on the subject "timer“ can be
found in the next paragraph.
3 Close the EPG by pressing the EXIT button .
DTR 210 _Phillips.book Seite 14 Mittwoch, 6. September 2006 10:53 10