Filter
Top Products
OPERATION 17
English
Settings
1 Press the MENU button to open the main menu. The
menu item settings is highlighted by default.
2 Press OK.
You'll receive the following screen:
3 By using the arrow button
or , highlight the
desired option and press the OK button in order to call
it up.
Note: In either case, observe the information texts displayed
on the screen. They will help you to select the correct settings.
Selecting and altering the settings is effected as usual by
means of the arrow buttons / /
/ ; a window
that is inserted can be closed by pressing the EXIT but-
ton.
Picture settings
Screen format
4:3 (Letterbox 16:9)
Reduces films in 16:9 mode for
4:3 format TVs to scale, and for
this purpose inserts a black bar
above and below on the screen.
4:3 (Pan Scan / CCO)
Presents films in the 16:9 for-
mat in a screen-filling manner.
With regard to 4:3 TVs, the left
and right picture border is cut
off.
16:9 format
Presents films on a 16:9 TV in
full size.
Video output TV
For the "video output TV“, the formats RGB, video
(FBAS) and S-Video (Y/C) are provided. Here RGB
presents the correct selection in most cases.
Video output VCR
Note: This item can only be selected, if you have not selected
RGB with regard to "video output TV".
Here you can choose between video (FBAS) and
S-Video (Y/C).
Automatic AFD
The broadcasted picture format may deviate from the pic-
ture format to be displayed. AFD recognizes and corrects
the presentation if you select the option ON.
Te l e t e x t
By means of this function you can choose whether your
receiver or your TV set is to display the teletext.
Default settings
By means of this function you reset the configuration for
the picture settings to previous set default values. These
settings in most cases allow for an acceptable image & lan-
guage reproduction.
Language
Menu language
Here you set the language of the OSD (on-screen display).
Audio language
Select a reproduction language for the programmes.
Second audio language
Select an optional reproduction language for the pro-
grammes.
Note: If the desired programme is not broadcasted in the lan-
guage set under "audio language“, the "second audio lan-
guage“ is used.
Caption language
Select a language for the captions.
Second caption language
Select an optional caption language for the captions, see
also "second audio language".
Automatic captions
Set this option to on if you want to automatically show
broadcasted captions in the selected caption language
(default: off).
Menu settings
Display duration of information banner
Here you define for how long the information banner, see
page 11, is to be shown with regard to a change of chan-
nel. If you want to completely eliminate the information
banner in case of a change of channel, select not any.
DTR 210 _Phillips.book Seite 17 Mittwoch, 6. September 2006 10:53 10