Philips 32PFL3615/77 Car Satellite TV System User Manual


 
7
Switch channels
Press CH +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the
Numeric buttons .
Press OK to use the channel grid.
Press
BACK A/CH on the remote
control to return to the previous channel.
Note
When you use a favourite list, you can only
select those channels in the list (see ‘Select a
favorite list’ on page 11 ) .
Switch channels with the channel grid
The channel grid allows you to view all
available channels in a grid format.
1 Press OK .
The channel grid appears. »
2 Press to browse the channel grid
and preview a channel.
The channel content is displayed after »
about two seconds.
3 Press OK to select a channel.
4 Use your TV
This section helps you perform basic TV
operations (see ‘Use more of your TV’ on page
9 ) .
Switch your TV on/off or to
standby
To switch on
If the standby indicator is off, press
( Power ) at the side of the TV.
If the standby indicator is red, press
( Standby-On ) on the remote control.
To switch to standby
Press
( Standby-On ) on the remote
control.
The standby indicator switches to red. »
To switch off
Press
( Power ) at the side of the TV.
The standby indicator switches off. »
Tip
Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
English
EN
Dali_77_EN_2.indd 7 4/6/2010 11:14:32 AM
Downloaded From TV-Manual.com Manuals