Filter
Top Products
23
English
Change audio language
You can choose an audio language if it is
available from your broadcaster. For digital
channels, multiple languages may be available.
For analogue channels, two languages may be
available.
1 While you watch TV, press OPTIONS.
2 For digital channels, select [Audio
language], select the language, then press
OK.
3 For analogue channels, select [Dual I-II],
select either language, then press OK.
Show or hide subtitles
1 While you watch TV, press SUBTITLE.
2 Select one of the following, then press OK.
• [Subtitles on]: Always display subtitles.
• [Subtitles off]: Never display subtitles.
• [On during mute]: When audio is
muted, display subtitles.
Note
•
Repeat this procedure to enable subtitles on each
analogue channel.
• Select [Subtitles] > [Subtitles off] to disable subtitles.
Select a subtitle language in digital
channels
Note
•
When you select a subtitle language in a digital TV
channel as described below, the preferred subtitle
language set in the installation menu is temporarily
overruled.
1 While you watch TV, press OPTIONS.
2 Select [Subtitle language], then press OK.
3 Select a subtitle language.
4 Press OK to conrm.
Customise the Scenea picture
You can load another picture as the wallpaper.
Note
•
When you load a new Scenea picture, it overrides the
current Scenea picture.
• To use another picture as the wallpaper, you need a
USB storage device that contains a picture that is less
than 1 MB in size.
1 Load a picture smaller than 1MB in size
into a USB storage device.
2 Connect the USB storage device to the TV.
3 Press .
4 Select [Browse USB], then press OK.
5 Select a picture, then press OPTIONS.
6 Select [Set as Scenea], then press OK.
7 Press any button to exit Scenea.
Change language
Depending on your broadcaster, you can change
the audio language, subtitle language, or both,
for a TV channel.
Multiple audio languages, subtitles, or both, are
broadcast through teletext or DVB-T digital
broadcasts. Dual sound broadcasts: With digital
broadcasts, you can select a subtitle language.
Change menu language
1 Press .
2 Select [Setup] > [TV settings] >
[Preferences] > [Menu language], then
press OK.
3 Select a language, then press OK.
EN
Downloaded From TV-Manual.com Manuals