Filter
Top Products
Introduction of advanced
multi-CD player operation
1
1
1
1 Function display
Shows the function names.
1 Touch AV MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
2 Touch ESC to return to the playback dis-
play.
# To return to the previous display, touch
BACK.
Repeating play
There are three repeat play ranges for the
multi-CD player: MULTI-CD (multi-CD player
repeat), TRACK (one-track repeat) and DISC
(disc repeat).
% Touch REPEAT on the function menu to
select the repeat range.
Touch REPEAT repeatedly until the desired re-
peat range appears in the display.
! MULTI-CD – Repeat all discs in the multi-
CD player
! TRACK – Repeat just the current track
! DISC – Repeat the current disc
Notes
! If you select other discs during repeat play,
the repeat play range changes to MULTI-CD.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to DISC.
Playing tracks in random order
Random play lets you play back tracks in ran-
dom order within the repeat range, MULTI-CD
and DISC.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Touch RANDOM on the function menu
to turn random play on.
Tracks will play in a random order within the
previously selected MULTI-CD or DISC ranges.
# To turn random play off, touch RANDOM
again.
Scanning CDs and tracks
While you are using DISC, the beginning of
each track on the selected disc plays for about
10 seconds. When you are using MULTI-CD,
the beginning of the first track of each disc is
played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Touch SCAN on the function menu to
turn scan play on.
The first 10 seconds of each track of the cur-
rent disc (or the first track of each disc) is
played.
Multi-CD Player
En
56
Section
11