Filter
Top Products
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
REPEAT (repeatplay)
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selecta repeat playrange.
Fordetails, refer toSelecting a repeat playrange
on theprevious page.
3 Press M.C. toconfirm the selection.
SHUFFLE (shuffle)
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectyour favorite setting.
! SONGS –Play back songsin the selected
list inrandom order.
! ALBUMS –Play back songsfrom a ran-
domly selectedalbum in order.
! OFF –Cancel random play.
3 Press M.C. toconfirm the selection.
SHUFFLE ALL(shuffle all)
1 Press M.C. toturn shuffle allon.
To turnoff,set SHUFFLE in theFUNCTION
menu tooff.
LINK PLAY(link play)
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to changethe mode; pressto select.
Fordetails about thesettings, refer to Playing
songs related tothe currently playing songon
the previouspage.
PAUSE (pause)
1 Press M.C. topause or resume.
AUDIO BOOK(audiobook speed)
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectyour favorite setting.
! FASTER– Playback ata speed faster than
normal
! NORMAL –Playback at normal speed
! SLOWER –Playback at aspeed slower
than normal
3 Press M.C. toconfirm the selection.
S.RTRV(sound retriever)
Automatically enhancescompressed audio and
restores richsound.
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe desired setting.
Fordetails, refer toEnhancing compressed
audio andrestoring rich sound (soundretriever)
on theprevious page.
3 Press M.C. toconfirm the selection.
Notes
! Switching the control mode to CTRL iPod
pauses song playback. Operate the iPod to
resume playback.
! The following functions are still accessible
from the unit even if the control mode isset
to CTRL iPod/CTRL APP.
— Pausing
— Fast forward/reverse
— Trackup/down
— Repeatplay (ONE/ALL/OFF)
— Randomplay (shuffle)
—
(list) touse iPodmenu
— a toturn the iPod clickwheel to the left
— b toturn the iPod clickwheel to the right
! When the control mode is set to CTRLiPod,
operations are limited as follows:
— The functionsettings are notavailable.
— The browsefunction cannot beoperated from
this unit.
Bluetooth Telephone
Connection menu operation
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this
operation.
1 Press and hold
to display the connec-
tion menu.
# You cannot operatethis step duringa call.
2 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
DEVICELIST (connectingor disconnecting acellu-
lar phonefrom the devicelist)
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe name of adevice you
want toconnect/disconnect.
! Pressand hold M.C.to switch the BDad-
dress anddevice name.
3 Press M.C. toconnect/disconnect the selected
cellular phone.
If the connectionis established, *is indicated
on thedevice name.
DEL DEVICE(deleting a cellular phonefrom the
device list)
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe name of adevice you
want todelete.
! Pressand hold M.C.to switch the BDad-
dress anddevice name.
3 Press M.C. todisplay DELETE YES.
4 Press M.C. todelete a cellularphone informa-
tion fromthe device list.
! While thisfunction is in use,do not turnoff
the engine.
ADD DEVICE(connecting a new cellularphone)
1 Press M.C. tostart searching.
! To cancel,press M.C. whilesearching.
2 TurnM.C. to selecta device fromthe device
list.
! If the desireddevice is notdisplayed, select
RE-SEARCH.
3 Press and holdM.C. to switchthe BD address
and devicename.
4 Press M.C. toconnect the selectedcellular
phone.
! To completethe connection, checkthe de-
vice name(DEH-7300BT) and enter the
link codeon your cellularphone.
! PIN codeis set to0000 as the default.You
can changethis code. Referto PIN CODE
(PIN codeinput) on this page.
! If fivedevices are alreadypaired, DEVICE-
FULL isdisplayed and itis not possibleto
perform this operation.In this case,delete
a paireddevice first.
SPCL. DEV. (setting aspecial device)
Bluetooth devicesthat are difficultto establish a
connection withare called specialdevices. If your
Bluetooth deviceis listed asa special device, se-
lect theappropriate one.
1 Press M.C. todisplay the settingmode.
2 Use M.C. to selecta special device.
Turn tochange the menuoption. Pressto se-
lect.
! If fivedevices are alreadypaired, DEVICE-
FULL isdisplayed and itis not possibleto
perform this operation.In this case,delete
a paireddevice first.
3 TurnM.C. to displaythis unit’s devicename,
BD addressand pincode.
4 Use a cellular phoneto connect tothis unit.
! To completethe connection, checkthe de-
vice name(DEH-7300BT) and enter the
link codeon your cellularphone.
! PIN codeis set to0000 as the default.You
can changethis code. Referto PIN CODE
(PIN codeinput) on this page.
Operating this unit
02
8
Section
Operating this unit
En