Pioneer HTZ-BD50 Car Stereo System User Manual


 
31Installation
3
Installation
USB device
connection
This player can play movie, music and photo
 les contained in the USB device.
1. Insert a USB device to the USB port until it
 ts into place.
USB Connection
2. Press HOME MENU.
Select [Movie], [Photo] or [Music] using
U
/
u
/
I
/
i
, and press ENTER ( ).
3. Select a  le using
U
/
u
/
I
/
i
, and press PLAY
or ENTER (
) to play the  le.
You can check the space of the USB device
on the screen.
4. Select the other mode. And withdraw the
USB device carefully.
NOTE
This player supports USB  ash memory/external
HDD formatted in FAT16, FAT32 and NTFS when
accessing  les (music, photo, movie). However,
for BD-LIVE and Audio CD recording, only FAT16
and FAT32 formats are supported. Use the USB
 ash memory/external HDD formatted in either
FAT16 or FAT32 when using BD-LIVE and Audio
CD recording.
The USB device can be used for local storage for
enjoying BD-Live discs from the Internet.
This unit can support up to 4 partitions of the
USB device.
Do not extract the USB device during operation
(play, etc.).
An USB device which requires additional
programme installation when you have
connected it to a computer, is not supported.
USB device: USB device that support USB 1.1
and USB 2.0.
Movie, music and photo  les can be played.
For details of operations on each  le, refer to
relevant pages.
Regular back up is recommended to prevent
data loss.
If you use a USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognised.
Some USB device may not work with this unit.
Digital camera and mobile phone are not
supported.
The USB Port on this unit cannot be connected
to a PC.
HB985-FB.BUSAPPK_Eng.indd 31HB985-FB.BUSAPPK_Eng.indd 31 2010-05-14  10:47:532010-05-14  10:47:53