Filter
Top Products
16
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
Corresponding Display Indications and Buttons
This product’s display features Key Guidance Indicators. These light to indicate which of
the 5/∞/2/3, FUNCTION, AUDIO and DSP buttons you can use. When you’re in the
Function Menu (refer to next section), Detailed Setting Menu (refer to page 19), Initial
Setting Menu (refer to page 45), Audio Menu (refer to page 35) or DSP Menu (refer to
page 38), they also make it easy to see which 5/∞/2/3 buttons you can use to switch
functions ON/OFF, switch repeat selections and perform other operations.
Indicator and corresponding buttons are shown below.
7 Head Unit 7 Remote Controller 7 Display
When 1 is lit in the display, perform appropriate operations with the z buttons.
When 2 is lit in the display, it indicates that you are in the Function Menu, Detailed
Setting Menu or Initial Setting Menu. You can switch between each of these menus and
between different modes in the menus using button x on the head unit or remote con-
troller.
When 3 is lit in the display, it indicates you are in the Audio Menu. You can switch
between modes in the Audio Menu using button c on the head unit or remote controller.
When 4 is lit in the display, it indicates you are in the DSP Menu. You can switch
between modes in the DSP Menu using button v on the head unit or remote controller.
Note:
• The Key Guidance Indicators are displayed only when the front panel is open. In this manual, all
display indication examples are when the front panel is open.
z
c
x
z
1
2
3
x c
v
v
4